





TN-1012 Standard Tennis Nets
Brand: 【UHS】
Product Name: 【Professional Tennis Nets】
Item NO.:【TN-1012】
Material: 【PE】
Color Option: 【Black】
Mesh Size: 【44 × 44 mm × 3.0mm】
Size / Dimension:【Length 12,700 × Width 1,070 mm】
Introduction
Looking for premium nets for tennis or a reliable tennis court net replacement? The TN-1012 is an exceptional choice designed for everyday play and standard club use. Whether you are verifying the precise tennis net size for your court layout, replacing a worn-out tennis ball net, or ensuring your facility meets every regulation tennis net standard, this model delivers dependable durability and performance.
TN-1012 Standard Tennis Nets
Key Specifications & Features
- Product Model: TN-1012
- Standard Configuration: Tennis net, steel wire rope, center strap, and center strap anchor (embedded part).
- Material: Crafted from high-quality polyethylene rope, offering excellent resistance to acids and alkalis, anti-aging properties, high impact resistance, and an extended service life.
- Craftsmanship & Edge Binding: Top binding is constructed from PVC material, which is acid- and alkali-resistant with stable chemical properties. The edge binding is reinforced with four layers of dense stitching (machine-made top 6 meshes double-layered, with single-layered construction for the rest).
- Dimensions: Length 12,700 × Width 1,070 mm.
- Mesh Size & Wire Diameter: Mesh size of 44 × 44 mm (±2 mm); wide-edge wire diameter of 3 mm.
- Installation Size Tolerance: Actual physical size tolerance after installation is ±20 mm.
- Color: Black.
- Packaging Details: 1 piece per package.
- Application Scope: Standard tennis courts.
Installation Instructions & Precautions
- Step 1: Attach the retained loop wire rope of the tennis net to the net hook on the “non-crank” secondary tennis post at the opposite side.
- Step 2: Insert the cut loop end of the wire rope into the pulley located under the cap of the main tennis post.
- Step 3: Thread the wire rope through the hole located at the upper section of the gear shaft, allowing 20 to 30 mm of the wire to protrude.
- Step 4: Slowly rotate the crank handle in a clockwise direction to tighten it.
- Step 5: Continue turning the crank handle clockwise to slowly elevate the net to the required standard net height tennis level





